ROTTLER – Vertical CNC Honing Machine H75

Diameter range 59.44 – 187.45 mm
Stroke length 483 mm
Spindle speed 1 – 400 RPM
Spindle power 2.77 kW
External Measures 1800 x 1600 x 2200 mm
Weight 1045 kg

 

Fully Automated Vertical Honing Machine

  • Automatic Lower Crash Protection System – every time cycle start is activated, the machine will check that the stones will not interfere with lower bore before starting rotation and stroking.
  • Spindle with ISO 30 Taper and Quick Change System – change hone heads in seconds
  • Automatic Zero Position Setting System – the machine will automatically set zero position and move to clearance position for calibration purposes.
  • Automatic Honing Stone retract at End of Cycle – the machine will automatically retract the stones during last stroke so that the stones do not leave any scratches or marks in the bore.
  • Automatic Cross Hatch Angle System –  the machine will automatically adjust parameters to programmed cross hatch angle and finish the bore to programmed angle.
  • Automatic Roughing and Finishing Load Sensing System – machine short strokes or dwells anywhere it senses a tight area.
  • Electronic Hand Wheel for moving work head from cylinder to cylinder and lowering hone head into each bore
  • Automatic Stone Feed-out System – once hone head is positioned in the bore, the machine automatically expands stones and rotates slowly before starting hone cycle
  • Automatic Plateau Brush Finish Program – the machine automatically expands plateau brushes to programmed load and counts down number of plateau strokes, then withdraws the brushes and retracts to the clearance position.

FEATURES

  • Automatic Hole to Hole and Automatic Roll Over System
  • Automatic Lower Crash Protection System
  • Vertical Stroking System
  • Automatic Load Control
  • Automatic Plateau Brush Finish Program
  • Automatic Zero Position Setting System
  • Automatic Stone Feed-out System
  • Automatic Honing Stone retract at End of Cycle
  • Automatic Cross Hatch Angle System
  • Automatic Roughing and Finishing Load Sensing System
  • Electronic Hand Wheel
  • Filtration System and Coolant Tank
  • International Multi Language
  • Touch Screen Control
  • International Language
  • Large Capacity and Versatility
  • Water Based Synthetic Coolant
  • Stainless Steel Doors

APPLICABLE FOR

  • Diesel Rebuilder
  • Engine Rebuilding
  • Heavy Duty
  • Jobber Shop
  • Performance Racing
  • Remanufacturing
  • Small Engines
  • Vintage Engine Rebuilding

 


Comments are closed.