|Diameter range||59.44 – 340 mm|
|Stroke length||1067 mm|
|Spindle speed||1 – 200 RPM|
|Spindle power||2.47 kW|
|External Measures||1800 x 1600 x 2400 mm|
Fully Automated Vertical Honing Machine
- Automatic Lower Crash Protection System – every time cycle start is activated, the machine will check that the stones will not interfere with lower bore before starting rotation and stroking.
- Spindle with ISO 30 Taper and Quick Change System – change hone heads in seconds
- Automatic Zero Position Setting System – the machine will automatically set zero position and move to clearance position for calibration purposes.
- Automatic Honing Stone retract at End of Cycle – the machine will automatically retract the stones during last stroke so that the stones do not leave any scratches or marks in the bore.
- Automatic Cross Hatch Angle System – the machine will automatically adjust parameters to programmed cross hatch angle and finish the bore to programmed angle.
- Automatic Roughing and Finishing Load Sensing System – machine short strokes or dwells anywhere it senses a tight area.
- Electronic Hand Wheel for moving work head from cylinder to cylinder and lowering hone head into each bore
- Automatic Stone Feed-out System – once hone head is positioned in the bore, the machine automatically expands stones and rotates slowly before starting hone cycle
- Automatic Plateau Brush Finish Program – the machine automatically expands plateau brushes to programmed load and counts down number of plateau strokes, then withdraws the brushes and retracts to the clearance position.
- Automatic Hole to Hole and Automatic Roll Over System
- Automatic Lower Crash Protection System
- Vertical Stroking System
- Automatic Load Control
- Automatic Plateau Brush Finish Program
- Automatic Zero Position Setting System
- Automatic Stone Feed-out System
- Automatic Honing Stone retract at End of Cycle
- Automatic Cross Hatch Angle System
- Automatic Roughing and Finishing Load Sensing System
- Electronic Hand Wheel
- Filtration System and Coolant Tank
- International Multi Language
- Touch Screen Control
- International Language
- Large Capacity and Versatility
- Water Based Synthetic Coolant
- Stainless Steel Doors
- Diesel Rebuilder
- Engine Rebuilding
- Heavy Duty
- Jobber Shop
- Performance Racing
- Small Engines
- Vintage Engine Rebuilding